Fx Airguns Crown 4.5mm Laminate Green

WHEN PURCHASING ONLINE, PLEASE CONTACT US FOR NECASSARY PAPER WORK REQUIRED FOR REGISTRATION OF AIR GUN IN CYPRUS, BEFORE PICK UP.

The FX Crown could be looked at as the traditional variant of the FX Impact. Just as refined, similarly accurate and almost just as powerful. Where the latter is built as a bullpup with -simply put- the trigger halfway the barrel, the FX Crown is built in a conventional manner. This makes the Crown simpler in design with, for instance, a lot less O-rings. And as the construction is easier to produce, the costs therefore lie lower too.

Despite the conventional built, FX has still managed to find space to use a large plenum, enabling the power to almost reach that of the FX Impact. Meaning the FX Crown too, is very suitable for long distance shooting. And it also means it’s perfectly able to shoot slugs.

An FX Crown feels secure and comfortable
It is because of the previously mentioned conventional set-up, that the FX Crown is chosen by many, offering a comfortable and intuitive shooting experience. The shooting stance feels natural with a robust and comfortable frond-end to hold on to. The long fore-end also is a plus when you decide to use a bipod for extra stability.

The length and controllability make the Crown perfect for long distance shooting and for this reason, it features a 20 MOA Picatinny rail to mount your riflescope. The canting of this rail helps you get the biggest possible adjustment range. That’s because a rifle scope works in such a way that the further the elevation is adjusted, the smaller the windage adjustment range gets. A 20 MOA scope rail helps preventing that, by keeping the elevation adjustment closer to its mid-range at longer distances.

Everything is adjustable!
That what makes the FX Crown so interesting and desirable, is the fact you can fine-tune virtually everything that’s on it. The possibility to adjust a lot of variables, helps you get the absolute best out of the FX Crown. And that’s without the need to compromise on anything. By adjusting the power and flow -by means of the externally adjustable regulator, power adjuster and adjustable hammer spring pre-load- you can tune the FX Crown to get the very best out of the pellet or slug of your choice.

Its also very easy to change the barrel, switching to another calibre, length or even twist rate. The barrel features a liner with rifling that’s pressed-in from the outside. This keeps the bore perfectly smooth and the smooth rifling itself helps creating a near perfect seal around the projectile. Barrels that are calibre .25 and smaller, feature a dual hole transfer port. The smallest hole can be used when using pellets and by twisting the barrel 180 degrees, a bigger hole with a less restrictive airflow can be used for slugs.

They really are crown jewels!
Of course, the FX Crown is available in different guises. For example, there are Crowns with a synthetic stock, a walnut stock and laminated stock.